- Astro Van
- Chevrolet Colorado
- Conversion Manual
- Driveline adjustment
- Electric Speedometer
- Motor Mounts
- Oil Pan
- Range Rover
- Speed Sensor
- Stock Repair Parts
- Volvo 200
- Volvo 700
DAT-110 Adaptor Flange for Datsun-Z V8
Why You Might Need One. The proper driveshaft for the Z V8 swap uses Chevrolet U-joints at both ends. If you use the Datsun U-joints, they can fail under hard use. Stealth...
Regular price $7500 $75.00
S10 Upper Radiator Bracket for Radiator in the "Forward" Position
Why You Might Need One. These billet aluminum brackets hold the radiator in place using stock S-10 rubber cushions. Note: These parts only work when installing the Corvette radiator in the...
Regular price $3340 $33.40
Colorado High Ground-Clearance Crossmember for ZQ8 and 2wd Z85 Trucks
Why You Might Want One. On a stock Colorado truck, the transmission cross member is about 5-1/4" above the ground. If the ZQ8 truck is heavily loaded, or lowered, the crossmember or exhaust can...
Regular price $19000 $190.00
Shorty-style Header for Chevrolet Colorado 5-cylinder
Bolts in with no modifications, except the requirement to extend the wiring to the oxygen sensor, and add oxygen sensor bung on trucks with 3.7 engine. Not emissions legal. Fits...
Regular price $38500 $385.00
DAT-106 Transmission Crossmember
Why You Might Need One. You might be better off ordering the full DAT-200 kit for mounting a V8 in a 1970-1978 Z Car, but we also sell the component pieces including this cross...
Regular price $8500 $85.00
Mazda RX7 LS1 VI Long Tube Headers
Why You Might Want Them. These are LS1 long-tube headers with O2 sensor bungs for use with Samberg and Hinson LS1 V8 kits. For Mazdas equipped with T56 transmissions (will not fit cars using 4L60-E transmissions)....
Regular price $73000 $730.00
Datsun 280ZX V8 Motor and Transmission Mounting Kit
Why You Might Want One. Unlike the most common V8 mounting kit for the ZX V8 swap, ours was not designed to install the V8 engine into the ZX with minimal modifications...
Regular price $28000 $280.00
Volvo 200 Series V8 Motor Mount
Why You Might Want One. A 200 Series Volvo, particularly the diesel, is a nice choice for an engine swap: it comes with suspension and brake components compatible with a Chevrolet...
Regular price $16000 $160.00
OEM GM VSS (Vehicle Speed Sensor) for 1989 4x4 trucks
Stock GM Speed Sensor, GM # 15547452, New OEM. Used with Pigtail, aftermarket replacement for GM part 12085498, sold separately here.
Regular price $5000 $50.00
Speed Sensor 4PRS
Four-pulse square wave speed sensor (4 PRS). This unit runs GM electric speedometers.
Regular price $12000 $120.00
Astro Van V8 Engine Mounts for V8 Engine Swaps
Why You Might Need Them. The Astro Van V-8 swap is probably the easiest V-8 swap around. For example, there is plenty of room in front of the V-8 to run...
Regular price $6500 $65.00
Heater Hose Restrictor & Splicers
Why You Might Need One. The 5/8" heater hose splicer on the left functions as a heater hose restrictor, which is often necessary to ensure proper cooling by forcing more coolant through...
Regular price $1500 $15.00
Reluctor Rings 4L60-002 and 4L60-003
WHY YOU NEED ONE. Without the correct Vehicle Speed Sensor (VSS) and Reluctor Ring, the fuel-injected TPI or TBI engine with electronic transmission that you install in your swap will...
Regular price $9900 $99.00
Radiator Hose Splicers
Aluminum Hose Splicers Ordering: Select the quantity/price desired and choose a size from the menu when ordering. Purpose of Hose Splicers: On some engine swaps, getting a molded radiator hose to...
Regular price $1500 $15.00
Jaguar V-8 Conversion Manual
Overview: Illustrated guide written by Mike Knell shows how to install a small block Chevrolet V-8 into 1972 through 1986 XJ-6, 12, and S model Jaguars. What it Covers: This manual covers everything...
Regular price $3995 $39.95
Lowering Blocks for Chevy Colorado
Why You Might Need One. Lowering blocks kits work with alignment shims that adjust driveline angles on swaps. Our lowering block kits include the required heavy-duty U-Bolts, Hi-Nuts, and extra aluminum lowering-block...
Regular price $2000 $20.00
S10 2.8 V6 Motor Mount Adaptor Plate
Why You Might Want Them. We make our S10 high-performance Motor Mount Adaptor Plates available for purchase separately, but you might be better served by our mount kit. These adaptor brackets secure the S10-106...
Regular price $6000 $60.00
Driveshaft adaptor flange for Mercedes
The Mercedes driveshaft adapter flange fits on the large 3-finger and small 3-finger flanges used on the back of transmissions and the front of differentials. This part will also fit on...
Regular price $9500 $95.00